Wissenswertes über:

Honing with three different honing-machines

If your requirement is honing , deep hole drilling or sawing? Please contact us at Kaiser Machinenbau, we are able and equipetd to tackle most of your hole finish requirements. Honing is an abrasive machining process. It produces a controlable, precision surface on a metal workpiece by scrubbing an abrasive stone against the bore surface.. Honing is primarily used to improve the surfac geometry for a specific application.

Finishing of cylinders for internal combustion engines, air bearing spindles and gears are a typical application for honing process.. There are different types of honing operation but all consist of one or more abrasive stones that are held under pressure against the surface they are working on.

For honing you use a Hone head with adjustable stones to achieve a precision surface. The stones are called honing stones . The base they are mounted on is called Hone head. The stone is a composed of abrasive grains. The finer the grain size the smoother is the surface on the workpiece.

During the honing operation the hone head is usually rotated in the bore while feed in and out of the bore in a cross hedge pattern..In order to flush the hone grit a way from the stones and bore surface, a special cutting fluide is supplied.

If you want a professional honing we are the ones to contact. Kaiser Maschinenbau works with three honing machines which are able to hone workpieces up to 50 to.